Untersuchungen über ternäre Chalkogenide. XXIV. Zur Struktur des TlGaSe2

On Ternary Chalcogenides. XXIV. The Structure of TlGaSe₂ TlGaSe₂ is monoclinic with a = 10.772(3), b = 10.771(5), c = 15.636(8) Å, ß = 100.6(3)°, Z = 16, space group Cc. The refinement yielded an R value of 0.082 for 1366 unique observed reflections (MoKα). The compound crystallizes with a layer structure with two anion layers perpendicular to c* in the unit cell. The structural motive of the layers are large corner-linked Ga₄Se₁₀- tetraeder consisting of four corner-linked GaSe₄ tetrahedra. Two adjacent layers are turned relative to each other by 90°. They are kept together by Tl¹⁺ ions, which are situated on straight lines parallel to the edges of the Ga₄Se₁₀ groups. They are surrounded by six selenium atoms forming trigonal-prismatic TlSe₆ polyhedra. 4₂ screw-axes within the layers are the reason for a strongly pronounced pseudo tetragonal symmetry. Different possibilities of stacking cause a onedimensional disorder along the c* direction. The relations between the TlGaSe₂ type and the TlSe type and also the high-pressure modifications of some compounds with the TlGaSe₂ structure are discussed.     

Synthesis of 2-amino-4-pyrimidinones from resin-bound guanidines prepared using bis(allyloxycarbonyl)-protected triflylguanidine

We have synthesized novel heterocyclic compounds from resin-bound guanidines. For this purpose, an amine immobilized on a solid support was acylated with protected amino acids. Following the deprotection, the liberated amines were guanidinylated utilizing a new member of the family of diurethane-protected triflyl guanidine reagents, N,N'-bis(allyloxycarbonyl)-N' '-triflylguanidine. The deprotected guanidines were subsequently regioselectively cyclized with beta-keto esters yielding novel compounds containing heterocyclic structures in high purities.     

Microwave-assisted extraction of zearalenone from wheat and corn

A microwave-assisted extraction (MAE) method has been developed for determination of zearalenone in wheat and corn by LC-MS with an atmospheric pressure chemical ionization interface (APCI). Matrix effects were minimized by use of matrix-matched standard curves for quantification of the analyte. The limit of quantification (LOQ) of the method was 30 ng g(-1) in wheat and 20 ng g(-1) in corn. The rapid LC-MS method enabled analysis of the extracts without clean-up, thereby reducing analyte losses, the time required for the analytical procedure, and costs. A factorial design approach was used to examine the effect on extraction efficiency of the main extraction conditions - time, temperature, and solvent. On the basis of results from statistical assessment extraction was performed with 1:1 (v/v) methanol-acetonitrile at 80 degrees C for 5 min. When these extraction conditions were applied to a wheat sample from a recently conducted international proficiency test, 92% (103 ng g(-1)) of the assigned zearalenone concentration (112 ng g(-1)) in the test material was obtained. This result was within the uncertainty (u) range of the assigned value of the test material (u=+/-15.8 ng g(-1), alpha=0.05) thereby demonstrating the accuracy of the method was sufficient. The precision of the whole method was also confirmed to be adequate, because the observed relative standard deviation (RSD) of 12% (n=10) also fulfils the quality criteria recommended by European guidelines for in-house method validation.     

Substituent Effects on the C-C Bond Strength, 15[1] Geminal Substituent Effects, 7[2]. Thermochemistry and Thermal Decomposition of Alkyl-substituted Tricyanomethyl Compounds

The thermolysis reactions of the tricyanomethyl compounds 10a-c were studied in solution. 2,2-Dicyano-3-methyl-3-phenylbutyronitrile ( 10a ) and 2,2-dicyano-3-methyl-3-(4-nitrophenyl)butyronitrile ( 10b ) decomposed heterolytically into carbenium ions and (CN)₃C⁻ anions, while 9-methyl-9-(tricyanomethyl)fluorene ( 10c ) underwent about 11% homolytic C-C bond cleavage into 9-methyl-9-fluorenyl- and tricyanomethyl radicals. The rates of the homolysis were determined by a radical scavenger procedure under conditions of pseudozero order kinetics. From the temperature effect on the rate constants the activation parameters were determined [ΔH ( 10c ) = 155· 2 kJ mol⁻¹, ΔS ( 10c ) = 58· 5 J mol⁻¹ K⁻¹]. Standard enthalpies of formation ΔH (g) were determined for 2,2-dicyanopropionitrile ( 2 ) (422.45 kJ mol⁻¹), 2,2-dicyanohexanenitrile ( 3 ) (349.74 kJ mol⁻¹), 2,2-dicyano-3-phenylpropionitrile ( 4 ) (540.75 kJ mol⁻¹), 2-butyl-2-methylhexanentrile ( 5 ) (-133.20 kJ mol⁻¹), 2,2-dimethylpentanenitrile ( 6 ) (-45.78 kJ mol⁻¹), and 2-methylbutyronitrile ( 7 ) (2.44 kJ mol⁻¹) from the enthalpies of combustion and enthalpies of sublimation/vaporization. From these data and known Δ (g) values for alkanenitriles and -dinitriles, thermochemical increments for ΔH (g) were derived for alkyl groups with one, two, or three cyano groups attached. The comparison of these increments with those of alkanes reveals a strong geminal destabilization, which is interpreted by dipolar repulsions between the cyano groups. - From ΔH (g) of 10c and ΔH of its homolytic decomposition the radical stabilization enthalpy for the tricyanomethyl radical 1 RSE ( 1 ) = -18 kJ mol⁻¹ was determined. Thus, 1 is destabilized, in comparison with the RSEs of tertiary α-cyanalkyl (23 kJ mol⁻¹) and α,α-dicyanoalkyl (27 kJ mol⁻¹) radicals, which were recalculated from bond homolysis measurements^[4] and the new thermochemical data. This change of RSE on increasing the number of α-cyano groups is discussed as the result of the additive contributions by resonance stabilization and increasing destabilization by dipolar repulsion. The amount of the dipolar energies was estimated by molecular mechanics (MM2).     

Beiträge zur Chemie des Phosphors. 111. 1,2-Dichlor-1,2-di-tert-butyldiphosphan

Contributions to the Chemistry of Phosphorus. 111. 1,2-Dichloro-1,2-di-tert-butyl-diphosphane The reaction of tri-tert-butyl-cyclotriphosphane, (t-BuP)₃, with phosphorus(V) chloride (molar ratio 1:2) leads to the title compound Cl(t-Bu)P? P(t-Bu)Cl ( 1 ), which is remarkably stable against disproportionation reactions. As the first 1,2-dichloro-1,2-diorganyldiphosphane, 1 has been isolated in a pure state and was thoroughly characterized. At room temperature, 1 exists in a mixture of the d,l and meso form (about 20:80). The mutual repulsion of the negative polarized Cl atoms and their preferred gauche arrangement to the free electron pairs of neighboured P atoms leads to a gauche-conformation of the lone electron pairs in the d,l- and to a trans-conformation in the meso-configuration.     

Thermochemical study of aliphatic and phenyl-substituted geminal diacetates

The standard enthalpies of combustion _c H ^o of aliphatic diacetates1 and aromatic diacetates2 were measured calorimetrically. The enthalpies of vaporization _vap H ^o or sublimation _sub H ^o of1 and2 were obtained from the temperature function of the vapor pressure measured in a flow system. From _f H ^o(g) of1 and2 new values of group increments for the estimation of standard enthalpies of formation of these classes of compounds were derived. The geminal interaction energy between the geminal acyloxy groups shows no anomeric stabilization.Geminal Substituent Effects, Part 12, for part 11 see Ref. 7.     

Melting of icosahedral gold nanoclusters from molecular dynamics simulations

Molecular dynamics simulations show that gold clusters with about 600-3000 atoms crystallize into a Mackay icosahedron upon cooling from the liquid. A detailed surface analysis shows that the facets on the surface of the Mackay icosahedral gold clusters soften but do not premelt below the bulk melting temperature. This softening is found to be due to the increasing mobility of vertex and edge atoms with temperature, which leads to inter-layer and intra-layer diffusion, and a shrinkage of the average facet size, so that the average shape of the cluster is nearly spherical at melting.     

Structural Studies of Bis(cyclopentadienyl)molybdenum‐Amino Acid Complexes

The crystal structures of molybdocene‐amino acid compounds of the type [Cp₂Mo^IV(κN, κO‐AA)]⁺Cl^—·xH₂O with AA = D ‐phenylalaninato (x = 1.5), DL ‐leucinato (x = 2) and DL ‐valinato (x = 1) have been determined (Cp = η⁵‐C₅H₅). The compounds feature an almost planar, five‐membered chelate ring of the aminocarboxylate moiety (deprotonated amino acid) with the molybdenum atom. In the phenylalaninato complex π‐stacking between the phenyl rings is found. The complexes were proven kinetically stable at pH < 1 for at least 24 h.     

Analyzing Anisotropic Exchange in a Pentanuclear Os2Ni3 Complex

Spin Hamiltonian parameters of a pentanuclear Os Ni cyanometallate complex are derived from ab initio wave function based calculations, namely valence-type configuration interaction calculations with a complete active space including spin-orbit interaction (CASOCI) in a single-step procedure. While fits of experimental data performed so far could reproduce the data but the resulting parameters were not satisfactory, the parameters derived in the present work reproduce experimental data and at the same time have a reasonable size. The one-centre parameters (local matrices and single-ion zero field splitting tensors) are within an expected range, the anisotropic exchange parameters obtained in this work for an Os−Ni pair are not exceedingly large but determine the low-T part of the experimental χT curve. Exchange interactions (both isotropic and anisotropic) obtained from CASOCI have to be scaled by a factor of 2.5 to obtain agreement with experiment, a known deficiency of such types of calculation. After scaling the parameters, the isotropic Os−Ni exchange coupling constant is cm⁻¹ and the D parameter of the (nearly axial) anisotropic Os−Ni exchange is ⁻¹, so anisotropic exchange is larger in absolute size than isotropic exchange. The negative value of the isotropic J (indicating antiferromagnetic coupling) seemingly contradicts the large-temperature behaviour of the temperature dependent susceptibility curve, but this is caused by the negative g value of the Os centres. This negative g value is a universal feature of a pseudo-octahedral coordination with configuration and strong spin-orbit interaction. Knowing the size of these exchange interactions is important because Os(CN) is a versatile building block for the synthesis of / magnetic materials.     

Isolierung,Konstitution und Synthese der (R)-(−)-Eucominsäure

From the bulbs of Eucomis punctata L'Hérit. (Liliaceae) and of a hitherto undefined species of Eucomis a new optically active phenolic carboxylic acid, eucomic acid, was isolated. Structure 1 was assigned on the basis of chemical and spectral evidence. The absolute configuration of eucomic acid was determined by its correlation with piscidic acid ((2 R, 3 S)-2-(4′-hydroxybenzyl)-tartaric acid) ( 8 ). Consequently, eucomic acid is (R)-(?)-2-(4′-hydroxybenzyl)-malic acid ( 1 ). For the stereospecific synthesis, methyl cis-p-methoxybenzylidene-succinic acid ( 22 ) was transformed into the γ-lactone 24 which, by catalytic hydrogenolysis, yielded (±)-2-(4′-hydroxybenzyl)-malic acid 1-methyl ester ( 27 ). Resolution with (?)-quinine led to the enantiomeric acids 29 and 30 . The methyl ester of the levorotatory enantiomer 30 was identical with the dimethyl ester 3 of 4′-O-methyl-eucomic acid.